TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 778 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-490 2-490 2-490 2-490 2-490 2. If 24 vdc is not present, wire 2034 is faulty. Is 24 vdc present at connector P172-A? YES WARNING Read WARNING on following page. NO Go to step 5 of this fault. Other indicator lights operate. Lighted indicator display OK. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS Voltage Test or STE/ICE-R #89 REASON FOR QUESTION 3. Is continuity present between connector P172-B and a known good ground? KNOWN INFO Other indicator lights operate. Lighted indicator display OK. Dashboard cable assembly OK. Auxiliary panel cable assembly OK. POSSIBLE PROBLEMS TEST OPTIONS Continuity Test or STE/ICE-R #91 REASON FOR QUESTION NO YES If continuity is not present, wire 3022 is faulty. If continuity is present, dump body switch is faulty. Faulty dashboard cable assembly. Faulty M1090/M1094 dump power cable assembly. Faulty dump body switch. Faulty auxiliary panel cable assembly. Faulty M1090/M1094 dump power cable assembly. Faulty dump body switch. Repair wire 3022 (para 2-45) or replace M1090/M1094 dump power cable assembly (para 7-125). Replace dump body switch (para 7-23). e34. DUMP UP INDICATOR DOES NOT OPERATE (CONT) e34. DUMP UP INDICATOR DOES NOT OPERATE (CONT) e34. DUMP UP INDICATOR DOES NOT OPERATE (CONT) e34. DUMP UP INDICATOR DOES NOT OPERATE (CONT) e34. DUMP UP INDICATOR DOES NOT OPERATE (CONT)