TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 757 of 1824
CONTINUITY TEST TM 9-2320-366-20-1 Change 1 2-469 (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to terminal lug TL201. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3024 from terminal lug TL201 to terminal lug TL126 (para 2-45) or replace front lights cable assembly (para 7-82). (5) If continuity is present, replace low pressure transmitter (para 11-30). (6) Position front grille on cab with washer and screw. (7) Position two washers and screws in front grille. (8) Tighten screw to 48-60 lb-in. (5-7 N·m). (9) Tighten two screws to 24 lb-in. (3 N·m). (10) Install PDP in dashboard with three screws. (11) Install three washers and screws in PDP. (12) Install PDP cover (para 16-2).