TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 736 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-448 2-448 2-448 2-448 2-448 1. START YES Is continuity present between connector PX7-7 and a known good ground? Headlight high beams operate. NO Faulty dashboard cable assembly. Faulty lighted indicator display. If continuity is not present, wire 3021 is faulty. If continuity is present, lighted indicator display is faulty. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS Continuity Test or STE/ICE-R #91 REASON FOR QUESTION Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) STE/ICE-R (Item 41, Appendix C) Multimeter, Digital (Item 22, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) References TM 9-4910-571-12&P e29. TURN SIGNAL INDICATORS AND HIGH BEAMS ON INDICATOR DO NOT OPERATE INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Personnel Required (2) Replace lighted indicator display (para 7-16). Repair wire 3021 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11).