TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 709 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-421 2-421 2-421 2-421 2-421 CONTINUITY TEST (1) Remove four screws from lighted indicator display. (2) Remove lighted indicator display from instrument panel assembly. (3) Disconnect connector PX7 from lighted indicator display. (4) Set multimeter to ohms. (5) Connect positive (+) probe of multimeter to lighted indicator display terminal 9. (6) Connect negative (-) probe of multimeter to lighted indicator display terminal 17 and note reading on multimeter. (7) If continuity is not present, go to step 7 of this fault.