TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 677 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-405 2-405 2-405 2-405 2-405 CONTINUITY TEST All auxiliary panel switch illumination faults are traced the same way. Power Take-Off (PTO) switch shown. NOTE (1) Remove six screws from auxiliary panel. (2) Lift auxiliary panel from auxiliary panel housing to gain access. NOTE Main connector and "A" connector will come off as a unit. (3) Disconnect PTO switch connector from PTO switch. (4) Set multimeter to ohms. (5) Connect positive (+) probe of multimeter to PTO switch lamp terminal 1. (6) Connect negative (-) probe of multimeter to PTO switch lamp terminal 2 and note reading on multimeter. (7) If continuity is not present, replace lamp (para 7-18).