TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 613 of 1824
TM 9-2320-366-20-1 CONTINUITY TEST Change 1 2-386.5 (1) Remove instrument panel for access (para 7-15). (2) Disconnect connector PX14A from hazard lights switch lamp base connector. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to one terminal of lamp base connector. (5) Connect negative (-) probe of multimeter to second terminal of lamp base connector and note reading on multimeter. (6) If continuity is not present, replace rocker switch lamp (para 7-18). NOTE Inspect connector pins/sockets for damage, corrosion, and serviceability. Check that connector pins are not pushed back and are capable of making good contact.