TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 599 of 1824
TM 9-2320-366-20-1 VISUAL INSPECTION Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. WARNING Change 2 2-380.5 (1) Remove Power Distribution Panel (PDP) cover (para 16-2). (2) Remove circuit breaker CB79 from Power Distribution Panel (PDP). (3) Install circuit breaker CB79 in Power Distrubution Panel (PDP). (4) Start enigne (TM 9-2320-366-10-1). (5) Position master power switch to off (TM 9-2320-366-10-1). (6) Remove circuit breaker CB70 from Power Distribution Panl (PDP). (7) If engine does not shut down when circuit breaker CB70 is removed, replace relay K2 (para 7-9). (8) If engine shuts down when circuit breaker CB70, replace master power switch (para 7-18). Perform step (9) if engine does not shut down. (9) Press start inhibit switch. (10) Install circuit breaker CB70 in Power Distribution Panel (PDP). (11) Install Power Distribution Panel (PDP) cover (para 16-2). NOTE All data on pages 2-380.6 through 2-380.9, including pages 2-380.6 through 2-380.9 deleted.