TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 534 of 1824
e11. ENGINE OIL PRESSURE GAGE DOES NOT OPERATE OR IS INACCURATE (CONT) KNOWN INFO TEST OPTIONS REASON FOR QUESTION POSSIBLE PROBLEMS Continuity Test or STE/ICE-R Test #91 6. YES NO VOLTS gage OK. Engine oil level OK. Engine oil pressure indicator goes out after engine starts. Engine oil pressure transmitter OK. Faulty engine control cable assembly. Faulty WTEC II dashboard cable assembly. Faulty WTEC III dashboard cable assembly. Is continuity present from connector PX6 pin 4 to a known good ground? If continuity is not present, wire 36 from connector P31 socket 11 to connector P32 socket 2 is faulty. If continuity is present, wire 36 from connector J31 pin 11 to connector PX6 pin 4 is faulty. Repair wire 36 from connector P31 socket 11 to connector P32 socket 2 (para 2-45) or engine control cable assembly (para 7-80). Repair wire 36 from connector J31 pin 11 to connector PX6 pin 4 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). 2-340 Change 2 TM 9-2320-366-20-1