TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 480 of 1824
KNOWN INFO 4. Is continuity present from connector J31pin 5 to ground? e6. ENGINE CRANKS BUT DOES NOT START (CONT) CAUTION Read CAUTION on following page. Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION TEST OPTIONS POSSIBLE PROBLEMS Faulty dashboard cable assembly. Faulty engine control cable assembly. If continuity is not present, wire 3015 from connector J31 pin 5 to terminal board TB2 position 18 on power distribution panel (PDP) is faulty. If continuity is present, wire 3015 from connector P31 socket 5 to terminal lug TL29 is faulty. NO YES Repair wire 3015 from connector P31 socket 5 to terminal lug TL29 (para 2-45) or replace engine control cable assembly (para 7-80). Repair wire 3015 from connector J31 pin 5 to terminal board TB2 position 18 on power distribution panel (PDP) (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). TM 9-2320-366-20-1 2-314 Change 1 Fuel quantity OK. Fuel/water separator primed. Air cleaner hose or tube OK. Start inhibit pushbutton switch OK. Relay K19 OK.