TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 478 of 1824
e6. ENGINE CRANKS BUT DOES NOT START (CONT) KNOWN INFO 2. TEST OPTIONS REASON FOR QUESTION NO YES Continuity Test or STE/ICE-R Test #91 This question eliminates possible problems and determines where troubleshooting continues. Go to step 4 of this fault. Notify DS Maintenance to perform Fuel System Troubleshooting task a.1.1 Engine Cranks But Does Not Start. KNOWN INFO 3. WARNING Read WARNING on following page. TEST OPTIONS Voltage Test or STE/ICE-R Test #89 REASON FOR QUESTION If 24 VDC is not present, go to step 5 of this fault. If 24 VDC is present, start inhibit pushbutton switch is faulty. YES NO Go to step 5 of this fault. Replace start inhibit pushbutton switch (para 7-19). Fuel quantity OK. Fuel/water separator primed. Air cleaner hose or tube OK. Relay K19 OK. Start inhibit pushbutton switch OK. POSSIBLE PROBLEMS Faulty dashboard cable assembly. Faulty engine control cable assembly. Faulty fuel shutoff solenoid. Fuel quantity OK. Fuel/water separator primed. Air cleaner hose or tube OK. POSSIBLE PROBLEMS Faulty start inhibit pushbutton switch. Faulty relay K19. Faulty dashboard cable assembly. Faulty engine control cable assembly. Is 24 VDC present at relay K19 socket 86 on power distribution panel (PDP)? Is continuity present from terminal lug TL29 to ground? TM 9-2320-366-20-1 2-312 Change 1