TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download

Page 437 of 1824

VOLTAGE TEST (1) Remove circuit breaker CB39 from PDP. (2) Set multimeter to volts DC. (3) Connect positive (+) probe of multimeter to circuit breaker CB39 socket 3 on PDP. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If 24 VDC is not present, go to step 13 of this fault. (6) Install circuit breaker CB39 in PDP. Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. WARNING TM 9-2320-366-20-1 Change 1 2-273