TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 435 of 1824
VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. WARNING (1) Remove power distribution panel (PDP) cover (para 16-2). (2) Set multimeter to volts DC. When testing to terminal X1 on PDP, ensure that multimeter probes come in contact with the outside metal ring. Failure to comply may result in false troubleshooting test results. (3) Connect positive (+) probe of multimeter to terminal X1 on power distribution panel (PDP). (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If 24 VDC is not present, go to step 10 of this fault. CAUTION TM 9-2320-366-20-1 Change 1 2-271