TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 397 of 1824
CONTINUITY TEST NOTE (1) Disconnect batteries (para 7-57). Remove plastic cable ties as required. (2) Remove two screws and washers from front grille. (3) Remove screw, washer, and front grille from cab. (4) Remove power distribution panel (PDP) cover (para 16-2). (5) Set multimeter to ohms. (6) Connect positive (+) probe of multimeter to terminal X3 on power distribution panel (PDP). (7) Connect negative (-) probe of multimeter to terminal lug TL64 and note reading on multimeter. (8) If continuity is not present, go to step 6 of this fault. TM 9-2320-366-20-1 Change 1 2-266.1