TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 365 of 1824
WARNING VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. (1) Install relay K1 in PDP. (2) Remove relay K26 from PDP. (3) Set multimeter to volts DC. (4) Connect positive (+) probe of multimeter to relay K26 socket 30 on PDP. (5) Connect negative (-) probe of multimeter to ground. (6) Position master power switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (7) If 24 VDC is not present, go to step 46 of this fault. (8) Position master power switch to off (TM 9-2320-366-10-1). TM 9-2320-366-20-1 Change 1 2-235