TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 349 of 1824
CONTINUITY TEST (1) Disconnect terminal lug TL163 from starter pushbutton switch. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to terminal lug TL163. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, repair wire 3007 from terminal TL163 to terminal board TB2 position 11 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (6) If continuity is present, replace starter pushbutton switch (para 7-20). (7) Connect terminal lug TL163 to starter pushbutton. (8) Install instrument panel (para 7-15). (9) Install power distribution panel (PDP) cover (para 16-2). (10) Connect batteries (para 7-57). TM 9-2320-366-20-1 Change 1 2-219