TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 330 of 1824
KNOWN INFO CAUTION Read CAUTION on following page. TEST OPTIONS POSSIBLE PROBLEMS Faulty start and charging cable assembly. Faulty dashboard cable assembly. 19. Repair wire 74 from connector P43 pin 8 to terminal TL33 (para 2-45) or replace start and charging cable assembly (para 7-132). e2. ENGINE DOES NOT CRANK (CONT) REASON FOR QUESTION If continuity is not present, wire 74 is faulty. If continuity is present, wire 74 is faulty. Transmission pushbutton shift selector in neutral (N). Batteries OK. Service drive lights OK. Circuit breakers OK. Starting motor OK. Battery to starter cable assembly OK. Oil pressure switch OK. Neutral start relay OK. WTEC II vehicle interface module (VIM) OK. WTEC II cab transmission wiring harness OK. WTEC II transmission ECU pushbutton shift selector (TEPSS) OK. Relay K26 OK. WTEC III transmission pushbutton shift selector (TPSS) OK. Engine control cable assembly OK. Relay K24 OK. Relay K1 OK. Starter pushbutton switch OK. Continuity Test or STE/ICE-R Test #91 NO YES Is continuity present from relay K1 socket 87 on PDP to connector J43 socket 8? Repair wire 74 from relay K1 socket 87 on PDP to connector J43 socket 8 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). TM 9-2320-366-20-1 2-200 Change 1