TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 319 of 1824
(1) Disconnect batteries (para 7-57). (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to relay K24 socket 85 on PDP. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, go to step 25 of this fault. CONTINUITY TEST TM 9-2320-366-20-1 Change 1 2-189