TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 271 of 1824
Perform transmission oil check when engine is at normal operating temperature (160°F-230°F (71°C-110°C)). NOTE Engine oil dipstick is located close to starter solenoid connections which are 24 VDC and high amperage. Use caution removing/installing engine oil dipstick to prevent shorting across starter solenoid connections. Failure to comply may result in serious injury or death to personnel or damage to equipment. WARNING (1) Raise cab (TM 9-2320-366-10-1). (2) Check engine oil dipstick for signs of being milky and over FULL line. (3) If engine oil dipstick shows engine oil to be milky and over FULL line, notify DS Maintenance. (4) If engine oil dipstick shows engine oil appears normal and not over FULL line, notify DS Maintenance. (5) Lower cab (TM 9-2320-366-10-1). (1) Start engine (TM 9-2320-366-10-1). (2) Check transmission oil dipstick for signs of oil being milky and over HOT FULL line. (3) If transmission oil dipstick shows oil level over HOT FULL line and milky, replace transmission oil cooler (para 8-10). (4) Shut down engine (TM 9-2320-366-10-1). TM 9-2320-366-20-1 Change 1 2-151