TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 237 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-117 2-117 2-117 2-117 2-117 (1) Remove ether cylinder (para 4-13). (2) Shake ether cylinder to determine if ether is present. (3) Check ether cylinder for damage. (4) Install ether cylinder (para 4-13). Temperature at engine block must be below 100° F (38° C) before ether starting aid will work. NOTE WARNING Starting fluid is toxic and highly flammable. Container is pressurized. NEVER heat container and NEVER discharge starting fluid in confined areas or near open flame. Failure to comply may result in injury to personnel. ETHER CYLINDER INSPECTION ETHER VALVE TEST (1) Position master power switch to on (TM 9-2320-366-10-1). (2) Press ether start switch (TM 9-2320-366-10-1) and listen for ether valve to click. (3) Position master power switch to off (TM 9-2320-366-10-1).