TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download

Page 217 of 1824

WARNING (1) Remove plug from adapter fitting on inlet side of fuel filter base. (2) Prepare STE/ICE-R Test #50 (TM 9-4910- 571-12&P) to adapter fitting. (3) Start engine (TM 9-2320-366-10-1). (4) Perform STE/ICE-R Test #50 (TM 9-4910- 571-12&P). (5) Raise idle speed to 2000 rpm for 10 seconds. (6) Pressure should read between 39 psi and 58 psi. (7) Record test results. (8) Shut down engine (TM 9-2320-366-10-1). (9) If pressure is below 39 psi, notify DS Maintenance. STE/ICE-R TEST #50 Diesel fuel is flammable. If fuel is spilled, clean it up immediately. Failure to comply may result in serious injury or death to personnel. TM 9-2320-366-20-1 Change 1 2-108.5