TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 185 of 1824
(1) Raise cab (TM 9-2320-366-10-1). (2) Check engine oil filter for leaks and damage. (3) If engine oil filter is not free from leaks and damage, replace engine oil filter (para 3-4). PRESSURE GAGE CHECK TM 9-2320-366-20-1 Change 1 2-81 (1) Lower cab (TM 9-2320-366-10-1). (2) Start engine (TM 9-2320-366-10-1). (3) Perform STE/ICE-R test #50. (4) Oil pressure gage should read 15 PSI (100 kPa) at 750 RPM and maximum at full load condition of 88 PSI (600 kPa). (5) If oil pressure gage does not read correctly, perform Electrical System Troubleshooting task e11. Engine Oil Pressure Gage Does Not Operate Or Is Inaccurate. (6) If oil pressure gage reads correctly, notify DS Maintenance. (7) Shut down engine (TM 9-2320-366-10-1).