TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1559 of 1824
TM TM 9-2320-366-20-1 9-2320-366-20-1 E-4. CAB SUPPORT TOOL Make the cab support tool from .38 inch (.96 cm) flat steel stock and angle iron stock according to the following instructions. Refer to the parts list and Figure E-3. Cab Support Tool Strut and Cab Rest for details. Item Part Number Material Description Size Qty 1 N/A Steel, Flat Bar 4.0 in. (10.2 cm) X 33.38 in. X (84.8 cm) X 0.38 in. (0.96 cm) 1 2 N/A Steel, Flat Bar 4.0 in. (10.2 cm) X 12.0 in. (30.5 cm) X 0.38 in. (0.96 cm) 1 3 N/A Angle Iron 2.0 in. (5.1 cm) X 2.0 in. (5.1 cm) X 3.5 in. (8.9 cm) 2 4 H.S.105VW-1 Insulgrip, CSA 105 C Figure E-3. Cab Support Tool Strut and Cab Rest a. All dimensions are in inches (centimeters). b. Cut cab support tool strut (1) from steel flat bar and bend to shape as shown in Figure E-3. Cab Support Tool Strut and Cab Rest. c. Cut cab support tool cab rest (2) from steel flat bar. d. De-burr and remove sharp edges. E-7 E-7