TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1500 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-936 2-936 2-936 2-936 2-936 1. START YES NO Nothing. Is 12 vdc present on connector J106-E? If 12 vdc is not present, wire 1802 is faulty. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS WARNING Read WARNING on following page. Voltage Test or STE/ICE-R #89 REASON FOR QUESTION YES NO 2. Is continuity present between connector J106-B and a known good ground? If continuity is not present, wire 3029 is faulty. Nothing. Faulty start and charging cable assembly. Faulty dashboard cable assembly. Faulty lighted indicator display. Faulty chemical detector. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS Continuity Test or STE/ICE-R #91 REASON FOR QUESTION INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-366-10-1). Personnel Required (2) Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) STE/ICE-R (Item 41, Appendix C) Multimeter, Digital (Item 22, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) References TM 9-4910-571-12&P Faulty start and charging cable assembly. Faulty dashboard cable assembly. Faulty lighted indicator display. Faulty chemical detector. e84. CHEMICAL DETECTOR DOES NOT OPERATE Repair wire 1802 (para 2-45) or replace start and charging cable assembly (para 7-132). Repair wire 3029 (para 2-45) or replace start and charging cable assembly (para 7-132).