TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1499 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-935 2-935 2-935 2-935 2-935 CONTINUITY TEST (1) Remove kick panel (para 16-3). (2) Disconnect connector P99 from connector J99. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to connector P99-2. (5) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (6) If continuity is not present, repair wire 1804 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (7) If continuity is present, repair wire 1804 (para 2-45) or replace chemical alarm kit cable assembly (para 7-59). (8) Connect connector P99 to connector J99. (9) Install kick panel (para 16-3).