TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1483 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-919 2-919 2-919 2-919 2-919 CONTINUITY TEST (1) Disconnect connector P6 from horn. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to connector P6. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, repair wire 3035 (para 2-45) or replace front lights cable assembly (para 7-82). (6) If continuity is present, replace horn (para 7-53). (7) Connect connector P6 to horn. (8) Position front grille on cab with washer and screw. (9) Position two washers and screws in front grille. (10) Tighten screw to 48-60 lb-in. (5-7 N·m). (11) Tighten two screws to 24 lb-in. (3 N·m).