TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1401 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-837 2-837 2-837 2-837 2-837 Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING VOLTAGE TEST (1) Raise cover on connector J95 intervehicular 12 vdc connector. (2) Set multimeter to volts dc. (3) Connect positive (+) probe of multimeter to connector J95-2. (4) Connect negative (-) probe of multimeter to ground. (5) Position main light switch to SER DRIVE (TM 9-2320-366-10-1) and note reading on multimeter. (6) If 12 vdc is not present, go to step 2 of this fault. (7) If 12 vdc is present, perform Electrical System Troubleshooting (e48. Side and/or Rear Marker Lights Do Not Illuminate) if towed vehicle is FMTV. If towed vehicle is not an FMTV, refer to towed vehicle TM for troubleshooting procedures. (8) Position main light switch to OFF (TM 9-2320-366-10-1).