TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1347 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-783 2-783 2-783 2-783 2-783 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Remove kick panel (para 16-3). (2) Set multimeter to volts dc. (3) Connect positive (+) probe of multimeter to terminal lug TL501. (4) Connect negative (-) probe of multimeter to ground. (5) Position master power switch to on (TM 9-2320-366-10-1). (6) Apply trailer brakes (TM 9-2320-366-10-1) and note reading on multimeter. (7) If 12 vdc is not present, repair wire 1594 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (8) Position master power switch to off (TM 9-2320-366-10-1).