TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1306 of 1824
2-748.2 Change 1 TM 9-2320-366-20-1 e61. ONE OR BOTH STOPLIGHTS DO NOT ILLUMINATE (CONT) KNOWN INFO TEST OPTIONS REASON FOR QUESTION WARNING Read WARNING on following page. 7. POSSIBLE PROBLEMS Blackout stoplights illuminate. Main light switch OK. Diode D1A OK. Relay K10 OK. Lamp OK. Composite taillight assembly OK. Turn signal switch OK. Is 12 VDC present at diode D1B-4 (LH) or diode D2A-2 (RH)? Voltage Test or STE/ICE-R Test #89 If 12 VDC is not present wire 461B (LH) or wire 460B (RH) is faulty. Faulty rear lights cable assembly. Faulty dashboard cable assembly. Faulty diode D1B. Faulty diode D2A. NO Repair wire 461B from diode D1B terminal 4 to connector J19 pin 2 (LH) or wire 460B from diode D2A terminal 2 to connector J19 pin 3 (RH) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). YES