TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1233 of 1824
CONTINUITY TEST (1) Remove kick panel (para 16-3). (2) Remove seven screws and washers from cover. (3) Remove screw, washer, cover, and nut from WTEC II VIM. (4) Remove REVERSE WARNING relay from WTEC II VIM. (5) Set multimeter to ohms. (6) Connect positive (+) probe of multimeter to REVERSE WARNING relay terminal 86. (7) Connect negative (-) probe of multimeter to REVERSE WARNING relay terminal 85 and note reading on multimeter. (8) If continuity is not present, replace REVERSE WARNING relay in WTEC II VIM (para 8-6). (9) Install REVERSE WARNING relay in WTEC II VIM. (10) Install cover on WTEC II VIM with nut, washer, and screw. (11) Install seven washers and screws in cover. Change 1 2-679 TM 9-2320-366-20-1