TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1183 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-629 2-629 2-629 2-629 2-629 CONTINUITY TEST CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to lamp socket. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3091 (para 2-45) or replace front lights cable assembly (para 7-82). (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to inside of blackout drive light housing. (3) Connect negative (-) probe of multimeter to lamp socket and note reading on multimeter. (4) If continuity is not present, replace blackout drive light (para 7-37). (5) If continuity is present, replace lamp (para 7-37). (6) Install lamp in socket. (7) Install gasket and cover on housing with three screws.