TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1181 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-627 2-627 2-627 2-627 2-627 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. VOLTAGE TEST (1) Loosen three screws on cover. (2) Remove cover and gasket from housing. Discard gasket. (3) Remove lamp from socket. (4) Set multimeter to volts dc. (5) Connect positive (+) probe of multimeter to lamp socket center contact. (6) Connect negative (-) probe of multimeter to ground. (7) Position main light switch to BO DRIVE (TM 9-2320-366-10-1) and note reading on multimeter. (8) If 12 vdc is not present, go to step 4 of this fault. (9) Position main light switch to OFF (TM 9-2320-366-10-1).