TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1175 of 1824
TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 TM 9-2320-366-20-1 2-621 2-621 2-621 2-621 2-621 CONTINUITY TEST CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to LED socket. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3091 (para 2-45) or replace front lights cable assembly (para 7-82). (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to inside of housing. (3) Connect negative (-) probe of multimeter to socket and note reading on multimeter. (4) If continuity is not present, replace composite front light assembly blackout marker LED (para 7-40). (5) If continuity is present, replace composite front light assembly (para 7-40). (6) Open blackout marker lamp. (7) Install blackout marker lamp in socket. (8) Install preformed packing and cover on housing with five screws.