TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1159 of 1824
TM 9-2320-366-20-1 OPERATIONAL TEST Change 1 2-612.33 (1) Start engine (TM 9-2320-366-10-1). (2) Position main light switch to SER DRIVE (TM 9-2320-366-10-1). (3) Select R (reverse) on pushbutton shift selector (TM 9-2320-366-10-1). (4) If backup light does not illuminate, go to step 23 of this fault. (5) If backup light does illuminate, repair wire 3094 (refer to Table 2-12.19. Backup Light Terminal Lugs) (para 2-45) or replace M1083/M1084/M1085/M1090/M1092/ M1093/M1094/M1096 rear lights cable assembly (para 7-84) or M1086/M1088/ M1089 rear lights cable assembly (para 7-104). (6) Select N (neutral) on pushbutton shift selector (TM 9-2320-366-10-1). (7) Position main light switch to OFF (TM 9-2320-366-10-1). (8) Shut down engine (TM 9-2320-366-10-1). M1083/M1084/M1085/M1086/ M1090/M1092/M1093/M1094/ M1096 Wire 3094 from Terminal Lug TL18 to Terminal Lug TL17 Wire 3094 from Terminal Lug TL18 to Splice E28 Wire 3094 from Terminal Lug TL18 to Splice E21 Wire Segment M1089 M1088 Model Table 2-12.19. Backup Light Terminal Lugs