TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1127 of 1824
TM 9-2320-366-20-1 CONTINUITY TEST (1) Remove two screws, lockwashers, RH composite taillight assembly, and terminal lug TL21 from right taillight carrier. Discard lockwashers. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to terminal lug TL21. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, go to step 12 of this fault. (6) If continuity is present, replace RH composite taillight assembly (para 7-39). (7) Install terminal lug TL21, and RH composite taillight assembly on right taillight carrier with two lockwashers and screws. Change 1 2-612.1 (8) Connect connector P64 to RH composite taillight assembly. (9) Install RH composite taillight lamp in socket. (10) Install preformed packing and cover on RH composite taillight assembly with six screws.