TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1107 of 1824
CONTINUITY TEST Change 1 2-604.175 TM 9-2320-366-20-1 (1) Remove nut, lockwasher, terminal lug TL32, and lockwasher from RH rear marker light screw. Discard lockwashers. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to terminal lug TL32. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, repair wire 3094 from terminal lug TL32 to splice E28 (para 2-45) or replace M1088 rear lights cable assembly (7-104). (6) If continuity is present, repair wire 489 from splice E41 to splice E27 (para 2-45) or replace M1088 rear lights cable assembly (para 7-104). (7) Install lockwasher, terminal lug TL32, lockwasher, and nut on RH rear marker light screw.