TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download

Page 1069 of 1824

CONTINUITY TEST Change 1 2-604.137 TM 9-2320-366-20-1 (1) Remove two screws and lens cover from LH side marker light base. (2) Set multimeter to ohms. (3) Remove LH side marker light lamp from socket. (4) Check continuity through LH side marker light lamp and note reading on multimeter. (5) If continuity is not present, replace LH side marker light lamp (para 7-38) and go to step 8 of this fault if required. (6) Install LH side marker light lamp in socket. (7) Install lens cover on LH side marker light base with two screws.