TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1059 of 1824
CONTINUITY TEST TM 9-2320-366-20-1 Change 1 2-604.127 (1) Remove two screws and lens cover from middle rear marker light base. (2) Remove middle rear marker light lamp from socket. (3) Set multimeter to ohms. (4) Check continuity through middle rear marker light lamp and note reading on multimeter. (5) If continuity is not present, replace middle rear marker light lamp (para 7-38) and go to step 12 of this fault if required. (6) Install middle rear marker light lamp in socket. (7) Install lens cover on middle rear marker light base with two screws.