TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1051 of 1824
CONTINUITY TEST Change 1 2-604.119 TM 9-2320-366-20-1 If vehicle is not M1089, repair wire 3094 from terminal lug TL32 to splice E21 (para 2-45) and go to step 10 of this fault if required or replace M1086 rear lights cable assembly (para 7-104) or M1085/M1096 rear lights cable assembly (para 7-84) and go to step 1 of this fault. (1) Remove nut, lockwasher, terminal lug TL30, and lockwasher from LH rear marker light screw. Discard lockwashers. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to terminal lug TL30. (4) Connect negative (-) probe of multimeter to to ground and note reading on multimeter. (5) If continuity is not present, repair wire 3094 from terminal lug TL30 to terminal lug TL92 (para 2-45) and go to step 10 of this fault if required or replace M1089 rear lights cable assembly (para 7-104) and go to step 1 of this fault. (6) If continuity is present, repair wire 489 from splice E49 to splice E50 (para 2-45) and go to step 10 of this fault if required or replace M1089 rear lights cable assembly (para 7-104) and go to step 1 of this fault. (7) Install lockwasher, terminal lug TL30, lockwasher, and nut on LH rear marker light screw.