TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1047 of 1824
CONTINUITY TEST Change 1 2-604.115 TM 9-2320-366-20-1 (1) Remove two screws and lens cover from RH rear marker light base. (2) Set multimeter to ohms. (3) Remove RH rear marker light lamp from socket. (4) Check continuity through RH rear marker light lamp and note reading on multimeter. (5) If continuity is not present, replace RH rear marker light lamp (para 7-38) and go to step 9 of this fault if required. (6) Install RH rear marker light lamp in socket. (7) Install lens cover on RH rear marker light base with two screws.