TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 1041 of 1824
Change 1 2-604.109 TM 9-2320-366-20-1 CONTINUITY TEST (1) Remove two screws and lens cover from LH rear marker light base. (2) Set multimeter to ohms. (3) Remove LH rear marker light lamp from socket. (4) Check continuity through LH rear marker light lamp and note reading on multimeter. (5) If continuity is not present, replace LH rear marker light lamp (para 7-38) and go to step 8 of this fault if required. (6) Install LH rear marker light lamp in socket. (7) Install lens cover on LH rear marker light base with two screws.