TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 804 of 930
TM 9-2320-366-10-2 3-254 Change 2 3-21. M1090/M1094 TROOPSEAT KIT INSTALLATION/REMOVAL (MODIFIED) This task covers: a. Installation b. Removal INITIAL SETUP Equipment Conditions Engine shut down (para 2-27f). Tools and Special Tools Screwdriver, Flattip (Item 38, Appendix B) Tools and Special Tools Wrench, Adjustable, 8 in. (Item 50, Appendix B) Personnel Required (2) a. Installation. (1) Install three dump body stakes (1) in dump body (2). (2) Install three bolts (3) from outside of dump body (2) into three dump body stakes (1). CAUTION Ensure seat post is flush with dump body floor prior to tightening bolts. Failure to comply may result in damage to equipment. NOTE • Left and right troopseats are installed the same way. Left side shown. • Steps (1) through (25) require the aid of an assistant.