TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 77 of 930
TM 9-2320-366-10-2 CAUTION Ensure there are no gaps between layers of cable. Gaps between cable layers indicate loose winding. Failure to comply may result in damage to equipment. NOTE Perform steps (22) through (25) if cable is not winding properly. (22) Position MAIN WINCH RH switch (11) to OUT. (23) Pay out cable (12) until cable on 30K winch drum has clean wind. NOTE Do not dead-end cable into rear rollers. Failure to comply may result in damage to equipment. (24) Position MAIN WINCH RH SPEED switch (10) to LOW. (25) Continue steps (20) through (24) until cable (12) is fully recovered. 2-465