TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download

Page 74 of 930

TM 9-2320-366-10-2 2-42. 30K WINCH OPERATION (CONT) (b) If cable (12) is too tight and is above tight mark on tension indicator, stop pay out and perform steps (15) through (17). (c) If cable (12) passes between loose and tight marks on tension indicator, proceed to step (18). CAUTION Power fairlead tension bolt must not be overtightened. Overtightening power fairlead tension bolt will put strain on cable, winch motor, and power fairlead. Failure to comply may result in damage to equipment. (14) Turn tension screw (13) to the right one complete turn. (15) Turn tension screw (13) to the left one complete turn. 2-462