TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 73 of 930
TM 9-2320-366-10-2 WARNING Wear heavy leather-palmed work gloves when handling cable. Cables can become frayed or contain broken wires. Never let moving cable slide through hands, even when wearing gloves. Failure to comply may result in injury to personnel. NOTE • If the power fairlead does not pay out the cable at the same rate of speed as the 30K winch, cable will hang loose. • Operator should stand approximately four feet away from the rear axle bogie to view the tension indicator during pay out. (13) During pay out, check that cable (12) passes through tension indicator, directly over rear axle bogie. (a) If cable (12) is too loose and hangs below loose mark on tension indicator, stop pay out and perform steps (14), (16), and (17). 2-461