TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 729 of 930
TM 9-2320-366-10-2 d. Slide Assembly Installation. NOTE Steps (1) through (11) require the aid of an assistant. (1) Remove wing nut (1) and retaining bar (2) from cover plate assembly (3). (2) Remove cover plate assembly (3) from slide assembly receptacle (4). (3) Assemble retaining bar (2) and wing nut (1) on threaded rod of cover plate assembly (3). Stow in TOOL KIT. (4) Remove safety pin (5) from large pin (6) of slide assembly (7). (5) Remove safety pin (8) from small pin (9) of slide assembly (7). (6) Remove small pin (9) from slide assembly (7). (7) Remove large pin (6) while holding slide assembly (7). 3-179