TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 69 of 930
TM 9-2320-366-10-2 (2) Pull out SYSTEM PARK control (3). (3) Position PTO switch (4) to on. CAUTION Keep tachometer within 1,250-1,450 rpm when Power Take-Off (PTO) is engaged. Do not exceed 1,450 rpm. Failure to comply may result in damage to equipment. NOTE In the event of a tachometer failure a HAND THROTTLE lever positioned to L is approximately 1,250-1,450 rpm. (4) Set engine speed by increasing HAND THROTTLE lever (5) until tachometer (6) reads 1,250-1,450 rpm. 2-457