Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download

Page 671 of 930

TM 9-2320-366-10-2 NOTE Perform steps (26) through (49) on cab roofs equipped with machine gun ring. (26) Position LMHC hook (27) over center of cab roof (19). (27) Install y-adapter (28) on machine gun ring (29). CAUTION Hook must be installed on hole closest to the front of cab roof. Rotate machine gun ring until hole is facing towards front of vehicle. Failure to comply may result in damage to equipment. (28) Install LMHC hook (27) to y-adapter (28). WARNING Cab roof and machine gun ring weigh approximately 500 lbs (227 kgs). The aid of two assistants is required to remove the cab roof and machine gun ring. Failure to comply may result in injury to personnel or damage to equipment. NOTE If may be necessary to push up on cab roof, from inside cab, to help loosen cab roof from cab. (29) Lift cab roof (19) from cab (30) until cab roof is clear of windshield (14), right side panel (12), left side panel (8), and rear panel (10). Change 1 3-132.1