TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download

Page 646 of 930

TM 9-2320-366-10-2 3-7. CLEANING VEHICLE (CONT) (2) Clean seat cushions (2), seat belts (3), and shoulder harnesses (4) with warm soapy water. (3) Wipe seat cushions (2), seat belts (3), and shoulder harnesses (4) dry with wiping rags. NOTE Both left and right side drain plugs are removed/installed the same way. Left side is shown. (4) Remove six drain plugs (5) from floor (6). CAUTION Do not use water to clean instrument panel area, especially under instrument panel. Failure to comply may result in damage to equipment. (5) Using a low pressure hose, wash mud, sand, or dirt from floor (6). (6) Wipe excess water from floor (6) with wiping rags. (7) Install six drain plugs (5) in floor (6). End of Task. 3-114