TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 645 of 930
TM 9-2320-366-10-2 Table 3-5. General Cleaning Instructions (Cont) Cleaning Materials Used to Remove Surface Oil/Grease Salt/Mud/ Dust/Debris Surface Rust/Corrosion Radiator/ Auxiliary Transmission Oil Cooler Not applicable. Low pressure water, air, soapy warm water, and damp or dry rags. Not applicable. Rubber Insulation Damp or dry rags. Damp or dry rags. Not applicable. Tires Soapy water and bristle brush. High pressure water and bristle brush. Not applicable. Cable Cleaning compound and wire brush. Wire brush. Wire brush and lubricating oil. * * After cleaning, apply light grade of lubricating oil to all unprotected surfaces to prevent continued rust. a. Cleaning Exterior. Wash vehicle per table 3-5 General Cleaning Instructions. b. Cleaning Interior. CAUTION Do not allow water to contact electrical controls, gages, or indicators. Failure to comply may result in damage to equipment. (1) Remove loose dirt and dust from instrument panel (1) with damp wiping rag. 3-113