TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download

TM 9-2320-366-10-2 3-7. CLEANING VEHICLE (CONT) Table 3-5. General Cleaning Instructions Cleaning Materials Used to Remove Surface Oil/Grease Salt/Mud/ Dust/Debris Surface Rust/Corrosion Body Grease-cleaning compound, running water, and damp or dry rags. High pressure water, soapy warm water, soft brush, and damp or dry rags. Corrosion-removing compound, bristle brush, dry rags, and lubricating oil.* Cab Interior (Metals) Grease cleaning compound and damp or dry rags. Damp and dry rags. Corrosion-removing compound, bristle brush, dry rags, and lubricating oil.* Cab Interior (Material) Saddle soap, warm water, soft brush, and dry rags. Soft brush, soapy warm water, and damp or dry rags. Not applicable. Frame Grease-cleaning compound rinsed with running water and rags. High pressure water, soapy warm water, wire brush, and damp or dry rags. Corrosion-removing compound, bristle brush, dry rags, and lubricating oil.* Starting Motor Mixed solution, 1 part grease-cleaning compound, 4 parts dry cleaning solvent, and rags. Soapy warm water, soft wire brush, and damp or dry rags. Bristle brush, warm soapy water, and dry rags. Engine/ Transmission Mixed solution, 1 part grease-cleaning compound, 4 parts dry cleaning solvent, and rags. High pressure water, soapy warm water, soft wire brush, and damp or dry rags. Bristle brush, warm soapy water, and dry rags. Glass Glass cleaning solution and clean dry rags. Glass cleaning solution and clean, dry rags. Not applicable. * After cleaning, apply light grade of lubricating oil to all unprotected surfaces to prevent continued rust. 3-112